Yancheng Xinmingyue Machinery Manufacture Co.,Ltd
0086-13805104251

Products

Home > News > Content

Mini HarvesterLight Weight Operation Comfortable

Small harvesters are a light weight harvester, divided into side-mounted and knot-style two. Breaking through the bottlenecks that rural areas could not enter into large harvesters, propelled the mechanization of harvest operations, shortened the labor cycle, and freed people from heavy manual labor. Widely used for harvesting wheat, rice, barley, hemp, beans and other crops. Replace the corresponding tool, install the upper and lower pallet and safe protective cover, you can also harvest shrubs, pastures, reeds and tea garden branches pruning and flower garden.

Harvest rice, harvest wheat, harvest soybeans, harvest corn, and stack it! For the forest to clean up, young forest tending, secondary forest transformation and forest tending cutting cutting shrubs, weeds, pruning, cutting small diameter wood. In the cutting machine equipped with some replaceable additional equipment or equipment, can also be used for harvesting rice and other crops, as well as pumping, playing hole drilling, spraying pesticides and other operations. The development of cutting machine is closely related to the development of small power machinery.

Small harvester machine light weight, powerful, beautiful appearance, comfortable operation, low labor intensity

Harvest clean, neatly laid, can be shop or piled up

Adapt to the plains, hills, terraces, triangular land and other fields and rotten fields

Simple operation, easy maintenance

Blade specifications: three teeth, 40 serrated pieces, 60 serrated pieces, 80 serrated pieces.

Small harvesters are divided into side-hanging and back-type two: ① side-mounted small harvester with hard axis drive, mainly by the engine, transmission system, clutch, working parts, control devices and side of the belt and other components. A single cylinder two-stroke air-cooled gasoline engine and a centrifugal friction clutch are arranged at one end of the drive shaft, and a working part composed of a reducer and a cutting tool is installed at the other end. There are many types of working parts, commonly used for circular saw blades, blades or nylon filaments. Operation, the drive shaft of the aluminum alloy casing hook on the hook under the operator's shoulder, holding the handle, horizontal swing hard axis, you can complete the cutting weeds, shrubs and other operations. Machine weighs about 6 to 12 kg, the speed of about 4500 ~ 5000 r / min. ② backpack type automatic harvester. With the flexible shaft drive, the general structure and side-hanging brush machine is similar, the difference is the engine back in the back of the operator, cutting parts driven by the flexible shaft, the engine power is generally 0.75 ~ 1.2 kilowatts. Between the engine and the back frame at two points and equipped with special rubber pieces to vibration. The flexible shaft is the flexible wire of the wire set in the hose to transmit the torque. The hose is a steel pipe wrapped around a metal braid with a rubber sheath to wind the soil into the shaft and keep the lubricating oil on the surface of the shaft. Fracture is generally between 1.5 and 2 meters.


Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML | trade-global.com